Tuesday, November 18, 2008

Behringerv Keyboard Amp

If your after an inexpensive keyboard amp then I highly reccomend this one.
It's a Behringer Ultratone K1800FX.
When it comes to bang for bucks I don't think you can do any better.
How does 4 channels, 180 watts, sub out and built in effects sound?
What if I told you it also has a phantom powered microphone input, XLR stereo out and costs around $AU 400?

Here's the LINK
.
.

Vintage Piano Keyboard

After extensive research into a new keyboard for the studio, I finally found this little beauty.
It's a Nord Electro 2. Great if your after nothing but vintage sounds like Hammond B3, Fender Rhodes, Wurlitzer, Clavinet and good acoustic piano's.
You can update and/or change sounds online and it comes in 3 variations.
This is the link to their website if you want to know more... NORD

Sunday, October 12, 2008

More VST Instruments

I put a link page on my studio website for VST Instruments.

RDMS VST Links

Finding good VST Instruments is always a bit of a struggle, so I decided to link to the ones that are actually studio quality.

VST Instruments (SoundFonts.it )



In my never ending pursuit for QUALITY VST Instruments I came across SoundFonts.it

Aside from some very good free instruments that have a brief nag screen (donationware), they also sell some wonderful high end emulations.
Classic Hammond B3 and Yamaha CP-70 as well as the timeless Rhodes piano.
The Trumpet emulation, called Miles'Tone, has to be heard to be believed....!

I've bought most of them now and love them all to death.
Payment is through Pay Pal. Registration was fast and painless using either code entry or activation .dll .
I've also had friendly communication with the developer and it's always fast and courteous.

So come on people..... Get the free instruments and try the demo's of the purchase versions.

You won't be dissapointed.....

Saturday, September 20, 2008

Too Old To Drive




Old Adelaide drivers !!!! Absolutely the worst on the planet.
My wife has had a new car for only five months and already had two idiots hit it. The last one was the most frustrating. In her seventies and not capable of reversing out of her own driveway without smashing into a parked car !!!
When talking to wife about it she commented "My insurance company will love me, I've had so many accidents lately". About time to hand over your licence before you kill someone you senile old fool.
To think that they actually give insurance discounts for older drivers !! Why? Sure they drive less, but when they do get behind the wheel it's absolute devestation......

Thursday, September 11, 2008

Duplication Frustration.

Here's a little tale for those of you already in the music business or just starting out.

Had a customer back in the studio telling me about his duplication woes.....

The duplicators have a mastering facility on their premises and were really upset that it was mastered somewhere else first. "They won't do a very good job" was the statement made at the time !!! (Interesting that such a blanket statement was made. Do they assume that nobody else is capable of mastering outside of their business. A very arrogant point of view indeed).
Additional comment were made about my customer having their artwork done somewhere else as well. You guessed it, they also have an in-house artwork facility.

"Tell me" I said to my customer, "You've had listening copies of the master for over a month now. Do you like it?"
"Yeah, it's great !" Came the response.
"You've played it to other people and they think it's good?"
"Everyone that's heard it loves it" said smiling customer.
"Well, at the end of the day if you, the customer, is happy with the results and the reaction from other people. Where's the problem?"
"The problem is that this guy is an arrogant dick, you don't know where else I can take my music for duplication do you?" said my very frustrated customer.

So here's the moral of this little tale.....

Never assume you know more about someones music that the artist. It's their creation and they are highly tuned in to the results.
Making blanket, criticising statements about their choices prior to and whilst seeing you is asking for trouble. What you are in fact doing is insulting their judgement.
Offer suggestions but don't criticise.

It's very common in this industry to bag other studio's work and equipment choices. This is a very slippery slope to get onto. (In fact I am probably a little guilty myself by posting this article, which is why no names have been included).

Accept the part of the creative process you have been offered. It is a privilege, no matter how much of the total project you are given.
.
.

Tuesday, September 9, 2008

Fonic Acoustic Treatment


For those of you living in Australia I highly recommend Fonic acoustic treatments.
My own studio is kitted out with their products and they are great.
Look good and improve the sound no end.

Available through Billy Hyde on request or many dealers in QLD.

Here's a link to their website if you want more information.
.
.

Forums are like crack cocaine

I keep doing it, I don't know why. It's not good for my mental health and yet I persist.
The studio keeps me busy. Customers walk out with big smiles and a great audio product. I've been recording now for more years than I care to think about and in that time learned one or two things.

So, due to a leg operation I find myself with a lot of free time on my hands and decide to post some comments on audio forums in the hope of speeding up the learning process for a few good people.
Mostly what you get back is nitpicking from people that seem to be looking for any minor point they can find disagreement with. Why? Do they somehow feel that it boosts their own credibility. If you were new to the audio game then all this argument is bound to cause confusion.

Recently I put forward the point that blowing big money on an expensive preamp is pointless untill you reach the limitations of more accesable gear. Training your ears takes time and until you can truly say that you are recording the best possible sound with what you've got then your better off investing in a wider choice of microphones etc..

All I got back was the argument that I must think that all the reviewers of high end preamps are idiots !!! HUH !!!!
Totally missed the point of what I was saying.

So that's it.. I give up. Let them bun fight about minor technicalities of each others posts.
I'm going cold turkey and back into the studio to make more money and good music.

Saturday, September 6, 2008

Vocals - Chase the volume not the compressor.

Ever wondered why your vocal track seems flat and uninteresting?
Sick of trying to get that perfect compression setting that makes a vocal shine?

Well, here's a different way to look at it. Don't rely on compression. That's right, it's possible to have an amazing vocal track with very little compression if any at all.
In fact, most of the time a compressor is the problem. You see, in order for a vocal track to shine it needs to be open and transparent. Full of emotional variances and tonal movement. Compressors, especially in the wrong hands, tend to flatten a performance and remove a lot of the vocals character. Ironically, right on the bits that have the most expression. Think about it, when a vocalist is raising their volume they are making a point. If your compressor is working it's hardest here, you are killing it.

With today's digital work stations there is absolutely nothing preventing you from achieving a balanced, open sounding vocal track. Start by copying and replacing the original vocal recording in your mix (must keep all originals untouched).

Solo the vocal track and play it through. Any parts that seem overtly loud or quiet should be highlighted and the amplification adjusted accordingly. (Do this in edit track mode if possible)
Start with 2dB adjustments until you get a feel for how much each part needs. Never be afraid to undo a change and try again with a different amount.
We are not looking at making the peaks all the same height or the bulk of the waveform looking the same.....
THIS IS AN EAR BASED ADJUSTMENT.

The reason you do this soloed is to get a well balanced vocal regardless of what the music is doing. Quiet and loud passages of music will fool your ears into making erroneous adjustments.

So, when you have completed this process and played the soloed vocal a few times to satisfy yourself that it's reasonably well balanced, play it with the mix.
If you still feel the need to compress the vocals, the discovery should be that you require very little to achieve a dense, transparent sound.
.
.

Wednesday, September 3, 2008

J B Ferox - VST Tape simulator















Digital recording is cold. Let's face it folks, we gained an amazing signal to noise ratio but lost something on the way.
In my never ending pursuit of lush sound in a digital world I've tried lot's of things.

Tubes add a certain harmonic distortion to sounds which is nice...but that's not IT.

Compression can do wonderfull things to sound from fattening to making something really groove...but that's not IT.

It starts with a clean optimum level recording, but with digital you really have to fight the peaks if you want lush and smooth.
What I mean by that is ordinary limiting of the peaks in your audio is not going to give you the warm fuzzy feeling your looking for.

Back when tape was the recording medium that ruled, there was a constant battle to keep the noise level down. Thus, you recorded as hot as you could to the tape. A byproduct of this was that extreme peaks were reduced simply because the tape could not record them. So, with nicely distorted and squashed peaks, the bulk of the important stuff was recorded at optimum levels.

With digital it's ALL recorded (if you don't clip), peaks and all. Not only that, the nature of peak level metering in today's hardware/software means a lot of stuff is not even recorded at optimum levels (more on that in future articles).
Just limiting the peaks actually affects the good stuff immediately after them. It's the nature of limiters, they are stupid and release time dependant. Additionally, tape has a certain amount of noise which actually helps carry the sound. Seriously. A certain amount of noise in a recording can actually be a good thing, dithering being a classic example.

So, finally the point of all this waffle.... A good tape simulator will not only tame your peaks in a way that prevents the good stuff being compromised. It also adds the distortion and noise characteristic's that make us feel warm inside.

J B Ferox is an excellent FREE one available on the net here.

Download it and do a little test. Drums are perfect for this due to their massive peak to RMS ratio. Find or create a snare track, limit it with ANY limiter you care to use. Now do the same thing with Ferox and see which one sounds better.
My money is on your choosing the tape simulation.
.
.
.
.

Tuesday, September 2, 2008

Auratone - the industry backbone !?

Quite a statement to make but hear me out (well, read me out).

There's always lot's of discussion on the net about which monitors to use in your studio. Is X better than Y? What about NS10's? Should I use a sub woofer?
All valid questions, but the thing is most people don't listen to your mixes on any of this stuff.
Your most important monitoring device should be a small MONO aurotone speaker or something equivalent.
You can spot them in lot's of pictures of REAL recording studio's, that little box in the middle of the desk above the meter bridge.
A lot of mixing gets done with just this single speaker and here's why.......

- Mixing in mono gives you a very acurate perspective on your phase issues.
- Small, single driver speakers tell you a lot about what's happening in the mid frequencies.
- If you can get it sounding great on this it only get's better in stereo.
- In mono there is a lot less ear fatigue during the mixing process.

The sad thing is that the original Aurotone's are no longer manufactured.
The good news is that there is a very good replacement available and here it is....

Avantone mixcubes. Very classy, very good, NOT that expensive.
Check out there website here.
.
.

Monday, September 1, 2008

Tuesday, August 26, 2008

Pushtec Equaliser


A really nice little VST plug in that gets great results.
Best of all it's free !!!
Click on the picture for the link.

For free VST plug in's on my website click here.
For free DirectX plug in's on wy website click here.
.
.

Minirator MR1Test Generator


A handy little tool for testing your playback system.
In conjunction with a good measurement microphone such as Behringer's ECM8000 and FFT analysis software you can get a good idea of your listening area's deficiencies.

Click on the image to get it from the manufacturers site.

Bob Katz - Mastering God


If you want to know more about the black art of mastering then this is your first port of call. Digital domain, the home of mastering guru Bob Katz.
Lots of great articles to get your education started.

LINK
.
.

Audio Technology Magazine






One of the best magazines I've found for serious audio engineers.
Lot's of articles, reviews and tips to keep you up to date.
An Australian publication that's available elsewhere with online subscription.
.
.

Mixing with your mind


A great book for those that want to really understand the art of recording music.
I bought this when it first came out and have to say that it really makes you think about how you go about the recording and mixing process.

Here's a link to the authors website...

Identify CD-R properties


I discovered this little utility for checking blank CD-R information.
You can download it here from my website...

Called CD-R ID it's no longer in development but still very useful.





Great if you have issues with suspected fake Taiyo Yuden etc.
.
.



A more comprehensive set of disc tools is Nero's CD Speed.
You can get this from my website here

The studio Facebook page





RDMS Recording studio has a facebook page
This is an open group and anyone is welcome to join.

Vocal Clarity

Here's a quick tip for making vocals in your mix stand out a bit more.

Play your mix and as the vocal is in full flight, mute individual channels that occupy the same space. Any muted channels that improve the vocals clarity should then have about 1dB of EQ reduction at 350Hz (medium Q). Repeat process till your happy.

This tip is about getting you to understand the fundamental issue with frequency in the 200-500Hz area. Mud often resides here, as well as an important part of vocal frequency presence.
With a little practice you can be more precise with the reductions frequency and Q.It also shows you how a problem with one particular sound is often somewhere else.

Analogy: A polar bear in snow is harder to see than one standing in a coalmine.

Monday, August 25, 2008

Behringer Blues

Why is it that every wannabe recording engineer bags Behringer gear?
Yeah, sure, they are built to a price and there's way better out there, but I'm willing to bet that the people Behringer equipment is aimed at have skills way below the capacity of the equipment.

As an analogy... If you were learning to play the guitar would your first axe be a $5000 custom shop Fender or a $300 special? Only a fool buys the very best when their talents do not warrant it.

My studio uses some Behringer equipment (as do a lot of other studio's that are in the business of making a living). Hell, I recorded a top 5 independant album award on a Behringer desk.... So spare me the diatribe of how their stuff is no good and unreliable etc....

Here's a tour of the Behringer factory by Audiotechnology magazine....



Turn me up !


Turn Me Up!is a non-profit music industry organization campaigning to give artists back the choice to release more dynamic records.

Hopefully this will get off the ground and establish sensible levels for mastered music. The YouTube movie on this site says it all.....

Reverb - Mud or Polish

I read on quite a few recording forums the complaint that reverbs make sound muddy. Well, yes it can, but there are reasons for this and you need to understand why. A standard reverb setting quite often adds a tail to the peaks of the sound. This tail, more often than not, then competes with the quieter sounds of your mix. There area few things you can do to reduce this...

1. If your reverb has an equaliser then reduce the low frequency content. Mud in a mix is typically below 500Hz.
2. Use the pre-delay function to give the sound some breathing space. This also increases the perception of a sound being in it's own sonic space.
3. Reduce the amount of diffusion and reflections. This gives a cleaner reverb sound.

Remember that a reverbs size is relative to the tempo of the music. Find a room size that works with the beat.

Squashing the life out of music

Yes, yes, I'm not the first to harp on about this subject but here's my 10 cents worth.

Music masters are by and large over compressed. Well, over limited I should say.
For some reason we have all been conned into thinking that if it's loud then it must be good.
Question, how many of you have heard really good mixes played loud in a studio, then listened to the "over squashed" master on the same system?

I believe those that have will agree that you lose something important when you chase insane levels for release. Depth, clarity and seperation ALL suffer.

Why do we do it? Biggest dick syndrome I suspect. It's not how big it is, it's what you do with it that counts !!!

Free plugins

There are a load of free plugins on my studio website.


Directx

VST


Enjoy.......

First thoughts

I've been planning on doing this for ages but time is money so it took a damaged knee to get this started.
I've been recording audio now for over 20 years and in that time learned a few things.
Some from experience, some from education. Very little from recording forums (more on that later).

Yes, I have recorded and Mastered commercial releases. No, I'm not god's gift to the audio industry. I have, however, built up enough practical experience to think that what I have to say may be of some use to somebody.

It occurs to me that the problem with a lot of audio forums is that the people offering advice are no better than those looking for it. Lot's of holier than thou attitude and equipment bias that can be more of a hinderance than a help.
The reality of recording is this..."Use your ears". Don't ask people how a spectral analysis should look for good music ! Compressors, E.Q. and reverbs all have one thing in common. They rely on YOU for the creative effect.
Play around with them, find out what sounds good, what sounds bad and why...